Product ID:ROSIN CORE SOLDER
MSDS Date:02/14/1991
FSC:3439
NIIN:00-542-0949
MSDS Number: BMGPX

BOW SOLDER PRODUCTS CO INC

900 HOBSON ST
UNION, NJ 07083
US

Emergency Phone: 800-526-4496

Info Phone: 800-526-4496

Cage: 52329

BOW ELECTRONIC SOLDERS

SAYREVILLE, NJ 08872 US

Telephone: 732-316-2177

Cage: 52329

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0-100% %

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 0-100% %

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: < 2% %

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: < 2% %

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 1 - 3% %

LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEVERE SHORT TERM OVEREXPOSURE MAY
LEAD TO CENTRAL NERVOUS SYSTEM DISORDERS. PROLONGED OVEREXPOSURE TO
LEAD CAN RESULT IN SYSTEMIC POSISONING. MAY CAUSE DAMAGE TO THE
BLOOD-FORMING, NERVOUS, KIDNEYS A ND REPRODUCTIVE SYSTEMS. DAMAGE
MAY INCLUDE REDUCED FERTILITY IN MEN AND WOMEN, DAMAGE TO FETUS OF
EXPOSED PREGNANT WOMN
Explanation of Carcinogenicity:THIS PRODUCT HAS NOT BEEN LISTED AS A
SUSPECT CARCINOGEN BY NTP, IARC OR OSHA.
Effects of Overexposure:SHORT TERM: DROWSINESS, SEIZURES, COMA, DEATH.
LONG TERM: METALLIC TASTE, ANEMIA, INSOMNIA, WEAKNESS,
CONSTIPATION, ABDOMINAL PAIN, GASTROINTESTINAL DISORDERS, JOINT AND
MUSCLE PAIN AND MUSCULAR WEAKN ESS, KIDNEY DYSFUNCTION.
Medical Cond Aggravated by Exposure:DISEASES OF THE BLOOD AND BLOOD
FORMING ORGANS, KIDNEYS, NERVOUS AND POSSIBLY REPRODUCTIVE SYSTEMS.

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE MOUTH-TO-MOUTH
RESUSCITATION IF NOT BREATHING. GIVE OXYGEN IF BREATHING IS
DIFFICULT. GET MEDICAL ATTENTION. EYES: FLUSH WITH RUNNING WATER
FOR 15 MINUTES WHILE H OLDING EYELID. GET MEDICAL ATTENTION. SKIN:
WASH WITH PLENTY OF SOAP & WATER. REMOVE CONTAMINATED CLOTHING. GET
MEDICAL ATTENTION. INGESTED: NOT NORMALLY AN INGESTION HAZARD. GET
MEDICAL ATTENTION.

Flash Point:300F,149C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:USE CARBON DIOXIDE OR DRY CHEMICAL ON SURROUNDING
FIRE
Fire Fighting Procedures:DO NOT USE WATER ON FIRE WHERE MOLTEN METAL IS
PRESENT
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUME OR VAPOR THAT
MAY BE TOXIC AND/OR RESPIRATORY IRRITANTS. REACTS VIOLENTLY WITH
OXYDIZING AGENTS.

Spill Release Procedures:ANY METHOD THAT KEEPS DUST TO A MINIMUM IS
ACCEPTABLE. VACUUMING IS PREFERRED. USE OF APPROVED RESPIRATORY
PROTECTION WHERE POSSIBILITY OF DUST/FUME EXPOSURE EXISTS. DO NOT
USE COMPRESSED AIR FOR CLEA NING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:GENERAL STORAGE PROCEDURES ACCEPTABLE.
Other Precautions:SPECIAL ATTENTION IS DRAWN TO THE REQUIREMENTS OF THS
OSHA LEAD STANDARD (1910.1025) AND RESPIRATOR STANDARD (1910.134)
SHOULD AIRBORNE EXPOSURES EXCEED THE OSHA ACTION LEVEL OR PEL.

Respiratory Protection:WHERE AIRBORNE EXPOSURES MAY EXCEED OSHA/ACGIH
PERMISSIBLE AIR CONCENTRATIONS, THE MINIMUM RESPIRATORY PROTECTION
RECOMMENDED IS A NEGATIVE PRESSURE AIR PURIFYING RESPIRATOR WITH A
DUST/FUME CARTRIDGE .
Ventilation:LOCAL EXHAUST VENTILATION IS RECOMMENDED FOR DUST AND/OR
FUME GENERATION OPERATIONS WHERE AIRBORNE EXPOSURES > PEL.
Protective Gloves:GLOVES IF CHANCE OF SKIN CONTACT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING TO MINIMIZE SKIN
CONTACT.
Work Hygienic Practices:AVOID INHALATION OR INGESTION. PRACTICE GOOD
HOUSEKEEPING AND PERSONAL HYGIENE PROCEDURES.
Supplemental Safety and Health
A SHOWER IS RECOMMENDED IF SIGNIFICANT DUST EXPOSURE OCCURS.

HCC:N1
Boiling Pt:B.P. Text:223F,106C
Melt/Freeze Pt:M.P/F.P Text:354F,179C
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:7.3 - 11.3
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-WHITE METAL, CORE HAS SLIGHT ROSIN ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS MAY CAUSE VIOLENT REACTION
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AT TEMPERATURES ABOVE THE MELTING
POINT, TOXIC FUMES AND/OR VAPORS MAY BE EMITTED.

Waste Disposal Methods:DISPOSER MUST COMPLY WITH FEDERAL, STATE AND
LOCAL DISPOSAL OR DISCHARGE LAWS. IF HAZARDOUS UNDER 40 CFR 261,
MATERIAL MUST BE TREATED OR DISPOSED IN A FACILITY MEETING THE
REQUIREMENTS OF 40 CFR 254 OR 265. IF NON-HAZARDOUS, DISPOSAL IAW
40 CFR 257.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.